US OUTDOOR PRODUCTS

                                                           A Division of Mares Inc. (2015) LLC  

12×24 Regency Grande

 Model: VA42083 Available Colors: White  Posts: 5 x 5 Warranty: First 20 Years

Your outdoor sanctuary awaits! Stately columns create a massive framework for relaxation and enjoyment that covers over two hundred and fifty square feet.

Crafted from premium vinyl and maintenance free, it’s a smart investment as well. An occasional rinse with a garden hose is all you need to keep your Regency Pergola looking great year after year.

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches- and we back this up with an industry-first twenty year warranty.

The Regency Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (6) (purchase at local building center)

-4×4 Bolt Down Bracket Kits (VA80205 & VA80206) (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements,

as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (48) – Can Be Cut From 1/2” Sheet of Plywood

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (18)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (48) – Can Be Cut From 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (18) (Length depends on blocking material)

• 1/4” Washers (18)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (6) (purchase at local building center)

-Concrete Ready Mix (6) (purchase at local building center)

Rafter/ Beam Support (Required)

-2x6x12 Pressure-Treated Posts (15) (purchase at local building center)

Our detailed instructions give you all the information you need to install and mount your pergola.

Please note: The Regency Grande kit now includes the 5X5 base trim

Pergolas

6.5×6.5 Lakewood

 Model: VA84044 Available Colors: Cedar Posts: 5 x 5 Warranty: First 10 Years

Even up close you’ll have a hard time believing it’s not wood – it’s better than wood! The Lakewood pergola is a revolutionary melding of vinyl and recycled wood pulp and it gives you the best of both worlds: a material that looks like wood with all of the consumer friendly maintenance- free benefits of vinyl!

The Lakewood pergola is a technological marvel and, more importantly for our customers, an attractively designed addition that enhances rather than defines your yard – it’s also a smart investment. An occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year. We stand behind your pergola with a 10 year warranty.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x4′ (10.2 cm x 10.2 cm x 122 cm) Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ (1.3 cm x 9 cm x 30.5 cm) Wood Shims (32) (see page 8)

• 1/4” x 2 3/4“ (0.64 cm x 7 cm) Cement Screws – Countersunk Head (12)

• 3/16” (0.48 cm) Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ (1.3 cm x 9 cm x 30.5 cm) Wood Shims (32) (see page 8)

• 1/4” x ?“ (0.64 cm x ? cm) Bolts and Nuts – Countersunk Head (12) (Length

depends on blocking material)

• 1/4” (0.64 cm) Washers (12)

• 1/4” (0.64 cm Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x8′ (10.2 cm x 10.2 cm x 243.8 cm) Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

NOTE: Like all products with wood fibre, colour is expected to season over time.

6.5×6.5 Portland

 Model: VA64998 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Nothing defines an outdoor room like a pergola. The Portland Pergola is ideal to encase a hot tub or patio set. Designed with classic New England architecture in mind, it’s as beautiful as it is functional. Made of premium weather-resistant vinyl, the Portland Pergola is maintenance free and we cover it with an industry-first twenty year warranty!

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year.

The Portland Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x4 (10.2 cm x 10.2 cm x 122 cm) Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products)

Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ (1.3 cm x 9 cm x 30.5 cm) Wood Shims (32) (see page 8)

• 1/4” x 2 3/4“ (0.64 cm x 7 cm) Cement Screws – Countersunk Head (12)

• 3/16” (0.48 cm) Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ (1.3 cm x 9 cm x 30.5 cm) Wood Shims (32) (see page 8)

• 1/4” x ?“ (0.64 cm x ? cm) Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

• 1/4” (0.64 cm) Washers (12)

• 1/4” (0.64 cm Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x8′ (10.2 cm x 10.2 cm x 243.8 cm) Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

8×8 Alcove

 Model: VA42034 Available Colors: White Posts: 6 x 6 Warranty: First 20 Years

In the same way that you are unique as a person, we believe that all backyards are unique as well. The Alcove pergola is designed to reflect that.

The Alcove pergola provides shade and space in the places that you need it most, but haven’t been able to install a traditional square pergola.

Excellent for smaller corners and nooks where you can enjoy breakfast at sunrise and a refreshing beverage at sunset. Recommended especially for chaisse lounges!

The Alcove measures 8’X8’X11.3′ and is over 8′ high!

We manufacture all of our products to create the look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year.

Best of all, the Alcove is covered by a twenty year warranty. It won’t crack, warp, rot or turn yellow in the sun!

The Alcove pergola requires a drill, level, ladder, measuring tape, pressure treated lumber and two people to assemble (please see instructions).

For installation on a wood deck or concrete patio, use our hassle-free Bolt Down Bracket System (purchase separately). For an in-ground installation, you can extend the posts with pressure treated lumber wood inserts purchased from your local hardware store. Our detailed instructions give you all the information you’ll need to install and mount your pergola.

At a glance, here is a look at the extra materials required to properly install your NEA pergola:

Extra Materials You will Need (Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

4x4x4 Pressure-Treated Wood Posts (4) (purchase at local building center)

4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application:• 1/2“ x 3 1/2” x 12“ Wood Shims (32)• 3/16” Concrete drill bit. Minimum 3“ long (1)• 1/2“ x 3 1/2” x 12“ Wood Shims (32)• 1/4” Washers (12) • 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

If Mounting Pergola Onto A Wooden/Composite Deck With AN ACCESSIBLE UNDERSIDE:

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)

If Mounting Pergola Onto An Existing Concrete Surface:

4x4x8 Pressure-Treated Wood Posts (4) (purchase at local building center)

Concrete Ready Mix (4) (purchase at local building center)

8×8 Mirage

 Model: VA42033 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

A charming and relaxing outdoor space is easily created with the Mirage Pergola. The Mirage Pergola offers shade from the summer heat and makes a great enclosure for a hot tub. Best of all, you can do more entertaining and less maintaining because the Mirage Pergola is crafted with premium vinyl, and is maintenance free. Best of all: the Mirage is covered with an industry-first twenty year warranty.

We manufacture all of our products by moulding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year.

The Mirage Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

J. 4x4x4 Pressure-Treated Wood Posts (4) (purchase at local building center)

K. 4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32)

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32)

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

• 1/4” Washers (12)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x8 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

8.5×8.5 Lenox Slide-Lock

 Model: VA42085 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Make any space outside your home a new living space. Enjoy your outdoor décor with the pergola that complements any landscape: The Lenox.

Crafted from premium vinyl and maintenance free, it’s a smart investment. Our Slide-Lok system will make installation a breeze. An occasional rinse with a garden hose is all you need to keep your Lenox Pergola looking great year after year.

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches- and we back this up with an industry-first twenty year warranty.

The Lenox Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products)

-1/4” x 2 3/4” Concrete Screws or Wood Screws (12)

-3/16” Concrete Drill bit. Min 3” long (1)

-Post Shims 1/2“ x 3 1/2” x 12“ (32)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

10×10 Arcadia

 Model: VA84045 Available Colors: Cedar Posts: 5 x 5 Warranty: First 10 Years

Since the word Arcadia refers to harmony with nature, we thought it the perfect name for our latest infinity product – a stunning 10 x 10 pergola made from a revolutionary melding of vinyl and recycled wood pulp. A product that gives you the best of both worlds: a material that looks like wood with all of the consumer friendly maintenance- free benefits of vinyl! Not only is the Arcadia Pergola attractively designed with aesthetic details impossible to replicate with wood, it’s also easy to care for and maintenance free.

With its gorgeous cedar color and natural feel, The Arcadia Pergola is a stunning structure that even up close you’ll have a hard time believing is not wood –  because it’s better than wood! The Arcadia pergola is a technological marvel and, more importantly for our customers, an immensely attractive addition that enhances the natural beauty of  your yard – it’s also a smart investment: An occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year. We stand behind your pergola with a ten year warranty on the structure.

The Arcadia Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete (Not intended to be installed on concrete pavers, patio stones, or interlocking bricks) or Wood Deck

-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from www.newenglandarbors.com or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x 2 3/4” Cement Screws (12)

• 3/16” Concrete Drill bit. Minimum 3” long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) Length depends on blocking material)

• 1/4” Washers (12)

• 1/4” Wood drill bit. Minimum 3“ Long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

NOTE: Like all products with wood fibre, color is expected to season over time.

10×10 Avalon

 Model: VA42062 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

The perfect basis of any outdoor room, the Avalon Pergola is a stunning addition to any yard patio or deck. Providing privacy, the ingeniously designed Avalon Pergola also adds the perfect amount of shade wherever you need it. A simple, three panel louver system allows for completely customizable shade in any direction. The Avalon pergola is created from premium vinyl and is maintenance free.

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year. We back this up with an industry-first twenty year warranty.

The Avalon Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x8 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products)

-1/4” x 2 3/4” Concrete Screws (12) and Wood Screws

-3/16” Concrete Drill bit. Min 3” long (1)

-1/2“ x 3 1/2” x 12“ Wood Post Shims (32)

If Mounting Pergola in Ground

-4x4x12 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

-Rafter/ Beam Support (Required)

– 2x6x10 Pressure-Treated Boards for Beams and Rafters (10) (purchase at local building center)

Louver assembly is covered by a 5 year warranty against defects.

10×10 Bordeaux

 Model: VA84056 Available Colors: White/ Composite Posts: 5 x 5 Warranty: First 10 Years

The Bordeaux Pergola provides one hundred square feet of classic comfort and shade for your garden. Bold lines and unique styling provide the foundation for chic ambience that will complement your landscaping.

The Bordeaux is created by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year and we back this up with an industry-first ten year warranty for our composite and twenty year warranty for our white vinyl.

The Bordeaux Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x8 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products)

-1/4” x 2 3/4” Concrete Screws (12)

-3/16” Concrete Drill bit. Min 3” long (1)

If Mounting Pergola in Ground

-4x4x12 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

NOTE: Like all products with wood fibre, color is expected to season over time.

10×10 Malibu

 Model: VA42057 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Create your own private beach club, an exclusive sanctuary. The Malibu pergola will give you privacy and shade from the sun’s harsh rays. With a full canvas shade cover, you’ll love your yard again. The Malibu pergola is created from premium vinyl and is maintenance free.

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year. We back this up with an industry-first twenty year warranty on your Malibu pergola itself and 2 years on the canvas shade.

The Malibu Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (Not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to

your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x 2 3/4” Cement Screws (12)

• 3/16” Concrete Drill bit. Minimum 3” long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) Length depends on blocking material)

• 1/4” Washers (12)

• 1/4” Wood drill bit. Minimum 3“ Long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

10×10 Trellis

 Model: VA42081 Available Colors: White Posts: 2 X 3.5 Warranty: First 20 Years

An outdoor room goes a long way in finishing your yard and creating a dedicated space for entertaining, relaxing and privacy. The Trellis pergola by New England Arbors is an easy solution to personalizing your yard; from the distinctive trellis style posts that easily support climbing plants and create an attractive oasis, to the easy installation with included brackets. The Trellis pergola is designed to be an attractive and practical addition to any yard.

Because the Trellis pergola is manufactured with modern techniques using premium materials, you get all the beauty and none of the maintenance. An occasional rinse with a garden hose will keep your pergola looking great for years. Even better – we’ll guarantee it for two decades!

The Trellis pergola requires a drill, level, ladder, measuring tape, and two people to install, rest assured our detailed instructions give you all the information you need to install and mount your pergola.

Extra Materials You will Need

We have provided mounting plates with stakes to mount your pergola into the ground. You may, however, follow one of the options below to better suit your need:

If Mounting Pergola onto Deck (with access to under the Deck)

-1/2“ Bolts with Washers and Locking Nut (12) (purchase at local building center). Length of bolts will depend on thickness of decking material.

If Mounting Pergola onto Deck (with no access to under the Deck)

-1/2” – 5/8“ Lag Bolts (12) (purchase at local building center) Length of Lag bolts will depend on thickness of decking material.

If Mounting Pergola on existing Concrete Pad

-1/2” x 4” Sleeve Anchors (12) (purchase at local building center)

The Trellis pergola has a 10’x10’ footprint. Inside height measures 88 1/4” to the bottom beams and outside height 95 7/8”.

10×10 Venetian

 Model: VA42022 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Add classic charm to your outdoor living space with The Venetian Pergola. A sanctuary for you, your family, and your friends, The Venetian Pergola offers shade from the summer heat or makes a great hot tub enclosure. Best of all, you can do more entertaining and less maintaining because the Venetian Pergola is crafted with premium vinyl, and is maintenance free. If you also want your pergola to offer some privacy, you can purchase our optional privacy panel.

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year. We back this up with industry-first twenty year warranty.

The Venetian Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You Will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (Not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to

your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x 2 3/4” Cement Screws (12)

• 3/16” Concrete Drill bit. Minimum 3” long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) Length depends on blocking material)

• 1/4” Washers (12)

• 1/4” Wood drill bit. Minimum 3“ Long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

Note: Some accessories displayed may be purchased separately.

12×12 Camelot

 Model: VA42070 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

The easiest way to create an exceptional outdoor room for relaxation and entertaining – The Camelot pergola is a truly grandiose outdoor setting. At 12 x 12, the Camelot Pergola can make any yard amazing, and with the ingeniously designed three panel louver system to block out as little or as much sun as you choose your pergola will be as comfortable as it is beautiful- and you don’t have to worry about the maintenance of a traditional structure – a simple rinse with a garden hose is all the Camelot Pergola needs to look great year after year.

Best of all, our Camelot pergola is covered with industry-first twenty year warranty!

Louver assembly is covered by a 5 year warranty against defects.

The Camelot Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x8 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

-1/2“ x 3 1/2” x 12“ Wood Shims (32)

-1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)

-3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

-1/2“ x 3 1/2” x 12“ Wood Shims (32)

-1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

-1/4” Washers (12)

-1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x12 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

Rafter/ Beam Support (Required)

-2x6x12Pressure-Treated Boards for Beams and Rafters (10) (purchase at local building center)

12×12 Elysium

 Model: VA42072 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Create an added dimension of space and elegance with the Elysium Louvered Pergola. Bold lines and precision engineering will turn your patio into your dream outdoor living space.

The easiest way to create an exceptional outdoor room for relaxation and entertaining – at 12 x 12, the Elysium Pergola can make any yard seem awesome, with the added flexibility of creating a private outdoor retreat right outside your back door!

Adding privacy and shade from the sun’s harsh rays, the ingeniously designed Louvered Pergola will add the perfect amount of shade, wherever you need it. A simple, three panel louver system allows for completely customizable shade in any direction by utilizing the easy-to-use louver turn bar included in the kit. The louver panels turn 45 degrees in both directions, with 4 inches between each panel. With the sun at its highest point, the Elysium will provide full shade.

New England Arbors’ products are built to last. Crafted from premium vinyl and maintenance free, your Elysium Louvered pergola is also a smart investment. We manufacture all of our products by molding premium hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches.

Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year. We back this up with industry-first twenty year warranty on your Louvered Pergola. An occasional rinse with a garden hose is all you need to keep your Elysium pergola looking great year after year. Our detailed instructions give you all the information you need to install and mount your pergola.

Extra Materials You Will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

-4x4x8 Pressure-Treated Wood Posts (2) (purchase at local building center)

-4×4 Bolt Down Bracket Kit – Do not use the Bolt Down Bracket system for installing the pergola over concrete pavers, patio stones, or interlocking bricks. (purchase from usor a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (16) – (Can be cut, using 1/2” plywood)

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (6)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (16) – (Can be cut, using 1/2” plywood)

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (6) (Length depends on blocking material)

• 1/4” Washers (6)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x12 Pressure-Treated Wood Posts (2) Cut down to 11’ (purchase at local building center)

-Concrete Ready Mix (2) (purchase at local building center)

Rafter/ Beam Support (Required)

-2x6x14 Pressure-Treated Boards for Beams and Rafters (to be cut down to 13’) (1) (purchase at local building center)

-2x6x12 Pressure-Treated Boards for Beams and Rafters (8) (purchase at local building center)

-2x6x6 Pressure-Treated Boards (2) (purchase at local building center)

-3/8” x 3 1/2” Lag Screw with Washers (6) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (6) (purchase at local building center, also purchase drill bit)*  Please consult your local building center for mounting anchors. These second set of screws will be used to mount your wood beam / ledger onto your structure. Refer to page 12 for more information.

Louver assembly is guaranteed for 5 years.

Please note: The Elysium kit now includes the 5X5 base trim.

12×12 Freemont

 Model: VA42044 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Our grand pergola in our most requested style! – A Pergola that attaches to your home. Create your own outdoor room, a sanctuary, with our 12 x 12 Freemont Pergola. The Freemont Pergola is crafted with premium vinyl, and is therefore maintenance free.

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year. We back this up with industry-first twenty year warranty.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (2) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (16) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (6)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (16) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (6) (Length depends on blocking material)

• 1/4” Washers (6)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (2) (purchase at local building center)

-Concrete Ready Mix (2) (purchase at local building center)

Rafter / Beam Support (Required)

-2x6x12 Pressure-Treated Boards (2) (purchase at local building center)

-2x6x14 Pressure-Treated Boards (6) – To be cut down to 12’-6” (purchase at local building center)

-2x6x6 Pressure-Treated Boards (2) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws with Washers (6) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (6) (purchase at local building center, also purchase drill bit)* Please consult your local building center for mounting anchors. These second set of screws will be used to mount your wood beam / ledger onto your structure.

12×12 Monterey

 Model: VA42073 Available Colors: Whote Posts: 5 x 5 Warranty: First 20 Years

       Enjoy your backyard oasis on your own terms. The 12’X12’ Monterey offers 144 sq. feet of relaxation. The distinct New England architecture provides classic and refreshing styling. The canvas weave lets you create the perfect amount of sun and shade for you, every minute of every day.

We manufacture all of our products to create the look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year.

Like all our vinyl products, the Monterey pergola is completely covered by our industry first twenty year warranty: it is guaranteed not to rot, or warp, or crack or turn yellow after being in the sun. Canvas shade is covered by a two year warranty.

The Monterey pergola requires a drill, level, ladder, measuring tape, wood shims and two people to assemble. For installation on a wood deck or concrete patio, use our hassle-free Bolt Down Bracket System (purchased separately). For an in-ground installation, you can extend the posts with pressure treated lumber wood inserts purchased from your local hardware store. Our detailed instructions give you all the information you need to install and mount your pergola.

At a glance, here is a look at the extra materials required to properly install your NEA pergola:

Extra Materials You will Need (Purchase from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck

4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

4×4 Bolt Down Bracket Kit (purchase from this site or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application:• 1/2“ x 3 1/2” x 12“ Wood Shims (32)• 3/16” Concrete drill bit. Minimum 3“ long (1)• 1/2“ x 3 1/2” x 12“ Wood Shims (32)• 1/4” Washers (12) • 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

If Mounting Pergola Onto A Wooden/Composite Deck With AN ACCESSIBLE UNDERSIDE:

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)

If Mounting Pergola Onto An Existing Concrete Surface:

4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

Concrete Ready Mix (4) (purchase at local building center)

Rafter/ Beam Support (Required)

-2x6x12 Pressure-Treated Posts (8) (purchase at local building center)

12 X 12 Kennedy

 Model: VA84047 Available Colors: Cedar Posts: 5 x 5 Warranty: First 10 Years

            Enjoy your back yard oasis under this rustic and impressive pergola.

The spacious Kennedy will both extend your living space and enhance your memories as you entertain and relax in your back yard.

Made of a revolutionary melding of premium vinyl and recycled wood, the it allows you to enjoy the best of both worlds: the pastoral feel of wood and the lifetime warranty of our premium vinyl.

How do we do it? We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches.

Maintenance is simple: just the occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year. We back this up with an industry-first ten year guarantee against rotting, warping or cracking!

As with any product containing wood fibre, we expect the color to season over time.

The Kennedy Pergola requires a drill, level, ladder, measuring tape, Post Shims 1/2“ x 3 1/2” x 12“ (32) and two people to assemble.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (2) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (16) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (6)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (16) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (6) (Length depends on blocking material)

• 1/4” Washers (6)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (2) (purchase at local building center)

-Concrete Ready Mix (2) (purchase at local building center)

Rafter / Beam Support (Required)

-2x6x12 Pressure-Treated Boards (2) (purchase at local building center)

-2x6x14 Pressure-Treated Boards (6) – To be cut down to 12’-6” (purchase at local building center)

-2x6x6 Pressure-Treated Boards (2) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws with Washers (6) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (6) (purchase at local building center, also purchase drill bit)* Please consult your local building center for mounting anchors. These second set of screws will be used to mount your wood beam / ledger onto your structure.

12×12 Regency

 Model: VA42055  Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Create your own outdoor room, a sanctuary, with our 12 x 12 Regency Pergola. The Regency Pergola is crafted with premium vinyl and is maintenance free. Best of all? It is covered with an industry-first twenty year warranty!

We manufacture all of our products by molding premium, hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches. Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year.

The Regency Pergola requires a drill, level, ladder, measuring tape, 2×6’s and two people to assemble.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from www.newenglandarbors.com or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut From 1/2” Sheet of Plywood

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut From 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

• 1/4” Washers (12)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

Rafter/ Beam Support (Required)

-2x6x12 Pressure-Treated Posts (8) (purchase at local building center)

Please note, pressure treated wood, concrete and additional hardware is required for proper installation. Consult the installation instructions for details.

SIMILAR PRODUCTS

 Pergola Extension Kits Pergola Extension Kits 8×8 Alcove 8×8 Alcove Shade Kit (Composite) Shade Kit (Composite) 12×12 Monterey 12×12 Monterey 12 X 12 Kennedy 12 X 12 Kennedy Pergola Privacy Trellis Pergola Privacy Trellis Pergola Extension Kits Pergola Extension Kits 8×8 Alcove 8×8 Alcove Shade Kit (Composite) Shade Kit (Composite) 12×12 Monterey 12×12 Monterey 12 X 12 Kennedy 12 X 12 Kennedy Pergola Privacy Trellis Pergola Privacy Trellis

12×12 Roosevelt

 Model:VA84046  Available Colors: Cedar Posts: 5 x 5 Warranty: First 10 Years

Grand and Impressive, the Roosevelt Pergola sets an impressive stage for your outdoor entertaining – an imposingly stylish 12 x 12 pergola made from a revolutionary melding of vinyl and recycled wood pulp. A product that gives you the best of both worlds: a material that looks like wood with all of the consumer friendly maintenance- free benefits of vinyl! Not only is the Roosevelt Pergola attractively designed with aesthetic details impossible to replicate with wood, it’s also easy to care for and maintenance free.

With its gorgeous cedar color and natural feel, The Roosevelt Pergola is a stately structure that even up close you’ll have a hard time believing is not wood –  because it’s better than wood! The Roosevelt pergola is a technological marvel and, more importantly for our customers, an immensely attractive addition that enhances the natural beauty of  your yard – it’s also a smart investment: An occasional rinse with a garden hose is all you need to do to keep your pergola looking great year after year. We stand behind your pergola with an industry-first ten year warranty.

The Roosevelt Pergola requires a drill, level, ladder, measuring tape, and two people to assemble.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from www.newenglandarbors.com or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut From 1/2” Sheet of Plywood

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut From 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)

• 1/4” Washers (12)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)

-Concrete Ready Mix (4) (purchase at local building center)

Rafter/ Beam Support (Required)

-2x6x12 Pressure-Treated Posts (8) (purchase at local building center)

Please note, pressure treated wood, concrete and additional hardware is required for proper installation. Consult the installation instructions for details.

NOTE: Like all products with wood fibre, colour is expected to season over time.

12×16 Valencia

 Model: VA42086 Available Colors: White Posts: 5 x 5 Warranty: First 20 Years

Match the grand designs of your home with the stately architecture of the Valencia Pergola. A full sixteen feet of frontage provides your family and guests with the comfort and space they deserve.

Make a statement! An outdoor room goes a long way in finishing your yard and creating a dedicated space for entertaining, relaxing and privacy. At 12 x 16, the Valencia Pergola can make any outdoor space complete, with the added flexibility of creating a private outdoor retreat right outside your back door!

New England Arbors’ products are built to last. Crafted from premium vinyl and maintenance free, your Valencia Attached pergola is also a smart investment. We manufacture all of our products by molding premium hi-grade polymers around traditional structural elements to create the classic look of wood without the traditional maintenance. In other words, you get the classic look of wood without the headaches.

Just the occasional rinse with a garden hose is all you’ll need to do to keep your pergola looking great year after year. We back this up with an industry-first twenty year warranty on your Attached Pergola. An occasional rinse with a garden hose is all you need to keep your Valencia pergola looking great year after year.

Extra Materials You will Need

(Purchase separately from us or a retailer of our products)

If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)

-4x4x7 Pressure-Treated Wood Posts (3) (purchase at local building center)

-4×4 Bolt Down Bracket Kit (purchase from us or a retailer of our products). Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.

If mounting pergola onto an existing concrete surface:

• 1/2“ x 3 1/2” x 12“ Wood Shims (24) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (9)

• 3/16” Concrete drill bit. Minimum 3“ long (1)

If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/2“ x 3 1/2” x 12“ Wood Shims (24) – Can Be Cut from 1/2” Sheet of Plywood

• 1/4” x ?“ Bolts and Nuts – Countersunk Head (9) (Length depends on

blocking material)

• 1/4” Washers (9)

• 1/4” Wood drill bit. Minimum 3“ long (1)

If Mounting Pergola in Ground

-4x4x10 Pressure-Treated Wood Posts (3) (purchase at local building center)

-Concrete Ready Mix (3) (purchase at local building center)

Rafter / Beam Support (Required)

-2x6x16 Pressure-Treated Boards (3) (purchase at local building center)

-2x6x12 Pressure-Treated Boards (9) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws with Washers (8) (purchase at local building center)

-3/8“ x 3 1/2” Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (11) (purchase at local building center, also purchase drill bit)* Please consult your local building center for mounting anchors. These second set of screws will be used to mount your wood beam / ledger onto your structure. Refer to

page 12 for more information.

Please note: The Valencia kit now includes the 5X5 base trim at no extra charge.